TiO2 Nanotube Array/Monolayer Graphene Film Schottky Junction Ultraviolet Light Photodetectors

Schottky junctions made from a titanium dioxide nanotube (TiO₂NT) array in contact with a monolayer graphene (MLG) film are fabricated and utilized for UV light detection. The TiO₂NT array is synthesized by the anodization and the MLG through a simple chemical vapor deposition process. Photoconductive analysis shows that the fabricated Schottky junction photodetector (PD) is sensitive to UV light illumination with good stability and reproducibility. The corresponding responsivity (R), photoconductive gain (G), and detectivity (D*) are calculated to be 15 A W^?1, 51, and 1.5 × 10¹² cm Hz^1/2 W^?1, respectively. It is observed that the fabricated PD exhibits spectral sensitivity and a simple power‐law dependence on light intensity. Moreover, the height of the Schottky junction diode is derived to be 0.59 V by using a low temperature I–V measurement. Finally, the working mechanism of the TiO₂NT array/MLG film Schottky junction PD is elucidated.     

Study of electrochemical performances of multi-doped spinel Li1.1Mn1.85Co0.075Ni0.075O4 at 4.3 and 5 V

Li_1.1Mn_2???2x Co _x Ni _x O₄ (x?=?0, 0.075) spinel powders were successfully synthesized using a liquid stirred tank reactor method. The electrochemical performances of the undoped and doped spinels at 4.3 and 5 V were investigated by X-ray diffraction, field-emission scanning electron microscopy, and electrochemical impedance spectroscopy. The capacity of Li_1.1Mn_2???2x Co _x Ni _x O₄ could be divided into two parts, with 4.3 V as the dividing line in the 3–5 V charge–discharge range. Low capacity and good cyclic performance were obtained when cycled in the 3–4.3 V range for the multi-doped Li_1.1Mn_2???2x Co _x Ni _x O₄ spinel. In comparison with multi-doped spinel at 4.3 V, the results of the cyclic performance worsened at 5 V because the structure underwent further shrinkage, the charge transfer resistance rose and the electrolyte decomposed.     

Effects and Corrections for Mobile NMR Measurement

Nuclear magnetic resonance (NMR) under motion has drawn significant attention in recent years. Motion of the NMR probe has serious effects on NMR measurement. For example, NMR logging normally runs at downhole condition with tool motion at a speed of 30 ft/min. We propose here methods for motion corrections of NMR data based on the quantitative analysis of motion effects on polarization and echo acquisition. We also produced a multi-functional NMR scanning system to verify the theoretical analysis. Presented experiments demonstrate that the theoretical and experimental results match very well.     

Enhanced electrocatalytic oxidation of hydroxylamine on Pt/polypyrrole composite modified glassy carbon electrode

A sensitive hydroxylamine sensor is developed by electrodeposition of Pt nanoparticles on pre-synthesized polypyrrole nanoparticles modified glassy carbon electrode. The modified electrode presents distinctly electrocatalytic activity toward hydroxylamine oxidation. The kinetic parameters such as the overall numbers of electrons involved in hydroxylamine oxidation, the electron transfer coefficient, standard heterogeneous rate constant, and diffusion coefficient are evaluated. The current response increases linearly with increasing hydroxylamine concentrations and exhibits two wide linear ranges of 5.0?×?10^?7–1.1?×?10^?3 and 1.1?×?10^?3–18.8?×?10^?3 M with a detection limit of 0.08 μM (s/n?=?3). The proposed electrode presents excellent operational and storage ability for determining hydroxylamine. Moreover, the sensor shows good sensitivity, selectivity, and reproducibility properties.     

GaN薄膜中的马赛克结构随厚度发生的变化

利用高分辨率X射线衍射(HRXRD)对MOCVD系统中生长在c面Al₂O₃上的不 同厚度的GaN薄膜内马赛克结构进行了研究. 在对称面的三轴X射线衍射曲线中, 用两种方法计算得到晶粒的垂直关联长度和水平关联长度, 两者均随着薄膜厚度的增加而增加, 并且垂直关联长度近似膜厚从倒易空间图中得出的横向关联长度也有相同的趋势, 结合非对称面的衍射曲线用Williamson-Hall方法和外推法分 别拟合出晶粒的面外倾斜角和面内扭转角, 他们随着薄膜厚度的增加显著减少, 这一切都表明厚度的增加, 晶粒的单向有序排列越来越整齐, 外延片的质量越来越高. 关键词： GaN薄膜马赛克结构 厚度 HRXRD     

柔性有机场效应晶体管研究进展

柔性有机场效应晶体管具有可折叠、质量轻、低成本等优点,在柔性显示、柔性传感器、柔性射频标签和柔性集成电路等方面显示了广阔的应用前景.本文在介绍柔性有机场效应 晶体管最新研究进展的基础上, 总结了柔性有机场效应晶体管的器件结构和柔性有机场效应晶体管所使用的衬底材料、 栅绝缘层材料、有源层材料及电极材料, 阐述了柔性有机场效应晶体管的制备工艺, 并讨论了不同的弯曲方式对柔性有机场效应晶体管性能的影响, 最后总结和展望了柔性有机场效应晶体管的应用领域. 关键词： 柔性 晶体管 有机/聚合物 溶液加工     

不同磁场环境下Heisenberg XXZ自旋链中的热量子失协

本文研究了不同磁场环境下一维Heisenberg XXZ自旋链中两量子比特的热量子失协特性. 在四种不同的磁场环境下: 1) B₁=B₂=0 (无磁场); 2) B₁≠0, B₂=0 (磁场只作用于其中一个量子比特); 3) B₁=B₂ (均匀磁场); 4) B₁=-B₂ (非均匀磁场), 对分别作用在每个量子比特上的磁场B₁和B₂对其量子关联的影响作了详细的讨论, 且数值计算和比较了其量子失协和量子纠缠的异同. 结果显示: 在有限温度下, 量子失协相比于量子纠缠更普遍, 且非均匀磁场相比于均匀磁场对量子失协和量子纠缠更有用, 更有利于量子通讯和量子信息处理过程. 关键词： 量子关联 纠缠 量子失协     

铀的结构相变及力学性能的第一性原理计算

基于密度泛函理论, 分别计算了α, γ铀的晶格常数、平衡态体积、体弹模量及其导数等, 与实验和其他第一性原理计算结果符合较好; 并根据焓-压强曲线得到了两相的相变压强～111GPa. 通过体心立方结构理想拉伸强度的计算, 分析其在极端加载条件下的结构行为. 另外, 计算了小应变情况下U-Nb (6.25at.%) 的能量-应变关系, 发现对应于剪切模量c’的应变会使得该结构的能量降低, 揭示了该结构的力学不稳定性. 关键词： 铀 相变 理想强度 结构稳定性     

单载流子传输的双异质结光敏晶体管探测器的研究

基于器件仿真器Atlas, 建立了InP/InGaAsP单向载流子传输的双异质结光敏晶体管(UTC-DHPT)的二维模型, 分析讨论了器件性能与外延结构参数的关系. 设计出同时具有高响应度(≥17.93 A/W)和高特征频率(≥121.68 GHz)的UTC-DHPT, 缓解了传统的异质结光敏晶体管光电探测器中探测效率和工作速度的矛盾. 关键词： 单向载流子 光敏晶体管 电流放大倍数 响应度     

随机双指数记忆耗散系统的非马尔可夫扩散

针对具有双指数耗散记忆核函数的两自由度耦合系统, 本文利用Laplace变换导出了热宽带噪声激励下该系统响应二阶矩的解析表达式. 并观察到位移二阶矩不同于单自由度情形下的反常扩散:<x²(t)> ∝ t^α (0<α<2, α≠1), 而是随时间及噪声等参数变化呈现普遍的振荡扩散现象.分析可得, 阻尼耦合因子B使粒子远离简谐势场的束缚, <x²(t)>随B的增大扩散加剧而摩擦系数增大却使其趋于平稳状态.进一步, 若两热噪声互关联时, 较小的互关联时间对二阶矩的影响较大, 反之作用较小. 伴随互关联强度递增, 位移二阶矩的扩散加剧, 位移间的相关性加强, 与物理直观相符. 关键词： 热噪声 非马尔可夫扩散 广义朗之万方程 关联性